ZJ 93-98 Jeep Grand Cherokee Radiator Support

MVF ZJ 1993-1998 Jeep Grand Cherokee Radiator Support

If you are still running your stock radiator support and you're worried about crushing it against a rock or you're just looking to add recovery points then you need this MVF ZJ radiator support for your Jeep. To put it simply ours is a skid plate plus has recovery points along with supporting your radiator that requires no modification to the radiator itself.

This support adds 1 3/4" ground clearance to the lowest point of the front of the vehicle while replacing the sheet metal support with a 1/4" skid plate.  It also ties the radiator support mounting points into the side of the frame and into your steel bumper or winch mount.

Optional: The recovery points are a full 1" thick with pin holes big enough for a 7/8" clevis pin.

The brace is built  .3" wider than the frame to fit over frame stiffeners and comes with two washer plates that you have the option of welding in, if you're not already running frame stiffeners or you can bolt it in.

Frame brackets tie into the side of the frame where a winch mount or tube bumper would mount, adding strength to both the bumper and the radiator support and recovery points as well as reinforcing the frame of the vehicle itself.

Mounts into the factory radiator support holes with stock hardware (bottom holes). The side holes should accept 3 of the 4 bolts mounting any steel bumper or winch mount that mounts to the inside of the frame (If you do not have an aftermarket bumper or winch mount and still want to use all 3 of the side tie in holes, please add additional inner frame plate and hardware package from the drop down menu).

What's included:

• Radiator support, comes powder coated.
• Washer plate
• Hardware